The links have been cycled so if you are a new Patron or are after a previous model, please find the Level 1 PrintWeek Archive link below
https://www.dropbox.com/sh/c0qlqtzgpdsbzw2/AABV7eTXJ-hCWoOJ74iQsMOMa?dl=0
Starting from Next issue all links will be provided via email.
Heya,
Sorry for delays, if you live in Australia you would have seen the news, massive storm hit us, power has only come back on now.
Here is the link for the FO Storm trooper arms, scaling guide is in the main folder. These are relatively easy prints and each part is not in many pieces.
The assembly is so easy, there is no assembly photos for this, it's not needed. Nothing has more than 2 parts per piece!
Forearms, 2 pieces...
2017-11-06 13:19:39 +0000 UTC View PostWall of text incoming... (the second update ill post after this to break up said wall of text)
Just fixed an issue on the FO Storm trooper arms and also have figured out the scaling for different body sizes, I'm providing 2 versions, one with the clips attached and one without. Since the suit has previously been printed I am using all the feedback from that customer to improve the printing of this suit, so if there is a delay ever wi...
Please find the updated link below containing the Batman Cowl.
https://www.dropbox.com/sh/jfl9vubxcb53p6m/AAAZJFuG7pXpoFETFPTb843pa?dl=0
2017-11-01 02:40:58 +0000 UTC View Post
Well, all uploaded and wrapped up for this issue, I will posting the Level 2 and 3 access links shortly after this.
Please find the updated Dropbox Links below for the PrintWeek Archives.
This link also includes the archive to the models that were released here before PrintWeek started.
Level 1 Access Archive:
2017-10-31 22:37:14 +0000 UTC View Post
Well, this image here is a perfect example of the #1 issue I have with Patreon and need you guys to help me figure out a way to keep this going, and stop these people!
This guy joined up, got all the files he needed - then blocked me.
As you can see, I had a small conversation with him, gave him what he asked for and when I go to reply (sure I was a bit late in the "no worries" reply... ) but when I went to reply, I found I could no long...
2017-10-31 21:36:23 +0000 UTC View PostHeya!
All done for Printweek issue #5! As mentioned, there is a bonus for all subscribers this week, the Jarbonite model, along with the zoom bust so yeah, this week it's a fair few files! The Batman cowl will be the Helmet this week, I am still looking through all the messages and comments and will see what we come up with for Issue #6! Currently at 58 patrons so over half way!
Where does the Patron money go towards here? 2017-10-31 02:44:22 +0000 UTC View Post
Hi everyone! Firstly welcome to the new Patreons, your support is appreciated greatly.
Can we hit that magic 100 by Christmas as set out in the goals? I think so, I hope so!
PrintWeek Issue #5
Level 3 Access: The only change to Issue#5 at the moment is the Ep7 Storm Trooper armor will start at the Arms, not the legs.
Level 2 Access: The Batman Arkham cowl will be this weeks helmet, any sug...
2017-10-27 03:04:19 +0000 UTC View PostPlease find the updated dropbox link below
https://www.dropbox.com/sh/r02rl3g3k6xp2lr/AACifKHKTAAoK4jNT60uSFrSa?dl=0
2017-10-24 22:17:17 +0000 UTC View PostPlease find the updated link below for PW Level 2 access
https://www.dropbox.com/sh/jfl9vubxcb53p6m/AAAZJFuG7pXpoFETFPTb843pa?dl=0
2017-10-24 22:16:28 +0000 UTC View PostPlease find the updated dropbox link below
https://www.dropbox.com/sh/c0qlqtzgpdsbzw2/AABV7eTXJ-hCWoOJ74iQsMOMa?dl=0
And the old link for the Pre-Printweek patreon downloads
https://www.dropbox.com/sh/v50karnuh42...
2017-10-24 22:15:21 +0000 UTC View PostWell, sadly it's happened again. Someone signs up, gets the links and then leaves without paying their subscription. :(
Luckily this is not a common thing, it's only happened twice in the past year so until it gets to be a really big issue, this solution seems to work for now.
Since Patreon is so awful at controlling this sort of thing, my only action is to cycle the dropbox links so no one can have them who is not a subscribe...
2017-10-24 22:12:26 +0000 UTC View Post
Hi all,
Now that issue 4 is wrapped up I thought I would give you a small preview of next weeks issue. I think by far the most popular suggestion was the TFA Storm trooper outfit, and well to be honest I have already made it! it was made for a customer (female) and rather short for a storm trooper, so this one is more for the standard 6 foot, 180-200 pound Trooper. But in saying that I know it prints well (and is the pink Trooper costume you ca...
2017-10-21 06:48:20 +0000 UTC View Post
Please find the updated link to the Repository with issue #4 added. Enjoy!
https://www.dropbox.com/sh/jfl9vubxcb53p6m/AAAZJFuG7pXpoFETFPTb843pa?dl=0
2017-10-21 04:35:59 +0000 UTC View PostPlease find the link (again, unchanged from last issue) to the archive for Level 3 Access.
https://www.dropbox.com/sh/r02rl3g3k6xp2lr/AACifKHKTAAoK4jNT60uSFrSa?dl=0
Hopefully everything is organized for everyone well enough now so you can go back and find older posts.
Re: Anyone who needs the specific or smaller pie...
2017-10-19 07:17:50 +0000 UTC View Post
Sorry all, my internet is freaking slow...
The last issue of the Classic Storm Trooper costume is uploading still, almost done tho.
This is a totally new helmet (those that have printed version 1 should see the differences)
I have cut it for a stock CR-10 build size, but if anyone needs pieces cut smaller just ask. I also included the full helmet uncut (it does not have the ears or rebreathers tho - it is just the helmet as is, you sti...
2017-10-18 08:11:22 +0000 UTC View PostPlease find the link below for the Level 1 Access for Printweek.
This link will not change, it is the same as the one posted last week with the other issues. This will make it easier for people, you can just bookmark that link and everytime a new issue is released you can just go to your bookmark instead of sifting through patreon posts.
I will add the static Jabba later on, this is the one with the poseable arms.
Hey guys,
I have had a slight personal issue come up this last week, you wouldn't have seen me on anything let alone patreon. My father in law has a been battling thyroid cancer for some time (is recovering now after radiotherapy) He usually works through anything, but this was a bit much for the tough old bugger.
I have had to spend most of the week helping on the farm, so I really do apologize. We don't get reception out t...
https://www.dropbox.com/sh/r02rl3g3k6xp2lr/AACifKHKTAAoK4jNT60uSFrSa?dl=0
2017-10-06 11:10:10 +0000 UTC View Posthttps://www.dropbox.com/sh/jfl9vubxcb53p6m/AAAZJFuG7pXpoFETFPTb843pa?dl=0
2017-10-06 11:09:31 +0000 UTC View PostHi Everyone,
Apologies for the few days AWOL... I had to take a small trip to take care of some family matters but am back now, so full steam ahead.
First, thanks to the new patrons for signing up! we are now at halfway to the initial goal which is fantastic and more than I could have hoped for.
I have read through all the comments on the last post regarding suit suggestions for the next 4 issues and there is some great ones in th...
Hiya!
I was getting it all ready and noticed a small issue with Jabba and an arm rotation angle, so I had to re-do a little bit. I'm just re-checking everything now and will upload tonight! Sorry again for the delay. I've also been trying to get this color printing working well (it works well it's more the models that need more work) but I'll share some pics soon of it in action.
It is a little slow I have to say, it applies the ink after...
2017-10-01 01:54:28 +0000 UTC View Post
Everything almost is wrapped up for issue #4, so a couple of days and it will be out. This week Level 1/2/3 get the next part to Jabbas throne, Jabba! this figure has posable ball joint arms and the tongue can be removed or plugged in depending on the scene you want.
Level 2/3 get the new Rebel Pilot helmet from Ep7, this is an unreleased model so again, you guys will be the first if not only to get access to it.
Level 3! well, finally t...
2017-09-25 06:58:50 +0000 UTC View Post
Heya, very sorry for the delay in this link, largest out of the lot in terms of parts, issue #4 will have no delay as its only the helmet left!
https://www.dropbox.com/sh/vyz16ywdt7vyone/AABY1ivgLxGPQ9pkMLlMmu_Xa?dl=0
2017-09-25 05:50:30 +0000 UTC View PostHey everyone,
Print Week issue 4 is coming along, I thought I had posted the link to the next Storm Trooper parts but appears I didn't, my bad it will be done shortly after this.
I have had a few printers come in during the past week (Anet E10, Anycubic Delta, XYZ Davinci- Color, Tronxy X5s.. and a magic delta coming this week also..) So I'll give you guys some insight to those hopefully also.
I am not really going to go do...
Jabbas Diorama Part 1
https://www.dropbox.com/sh/hwugwv64i44ed09/AADRKVySeGhiKlyxkPgg1MxBa?dl=0
2017-09-11 12:48:07 +0000 UTC View Post
If you are seeing this message you are a Level 2 or Level 3 Patron
The other models are still uploading, but Level 2 models are done, Robocop and Heimdall!
Message me here for the link.
Hi all,
I am uploading issue #3 now, it is going to take a little while because it's pretty big this week, so being 3am (10 hours ahead of most of you ...) I will probably hit the sack and post the link in the morning when it's finished uploading.
For the new Patreon members, here is the link to the Hex3d archive, this contains all the models that were released before the issues of Printweek were released.
In this archive is...
All going well, this is a quick update to say still on track.
Welcome to the new Patrons, as you see you probably can't find any active dropbox links, if you can't wait till tonight please message me and I will make some temporary ones for you, this is no hassle.
Back to it! I have alot of parts to triple check.
thanks
Geoff.
This is a new system we are formulating, so please bare with me while we fine tune these little things.
Firstly, I apologize to people that just signed up and didn't have immediate access to those links, that was not my intention. Some Patreon pages will not let you access anything until that first months payment is processed, but I would prefer to just trust people than be paranoid about it here.
Moving forward, when I p...
2017-09-08 16:23:16 +0000 UTC View Post